UBA HHP

Additional information

PRODUCT DESCRIPTION	Regulators of UBA-HHP series are high pressure, spring-piston loaded, direct operated regulators. They work as pressure reducing regulators. Therefore, their main function is the regulation of the outlet pressure (P2) of the process they are installed on. The compact and rugged design they feature allows the employment of UBS-HHP under a wide variety of high pressure process conditions. The regulated process fluids can be both industrial liquids and gases. There are basically two different standard constructions, namely IS3 (Stainless Steel) construction (standard) and MS3 (Monel) contruction (special). Rating of connections is available up to ANSI 2500. The possibility of supplying different materials for the elastomeric parts makes them good candidates for a wide group of process fluids chemically different from each others. They are easy to install and to maintain.
LIST OF FEATURES	• FUNCTION: Reduction, direct acting • CONNECTIONS DIAMETERS: from¼” up to 2” • CONNECTIONS TYPE Threated ends NPT-F, Flanged ANSI (upon request). • BODY MATERIALS : Stainless Steel (316SS), Monel. • MAX RATING: ANSI 2500. • MAX UPSTREAM PRESSURE: 300 bar.g. • BODY MATERIALS: Stainless Steel (316SS), Monel. • REGULATED INTERVALS: 1 – 135 bar.g. For higher or lower pressures contact our technical department. • DIAMETER: from “1/4” up to 2” (DN ¼” only with threated end). • SEAT: single. • Cv: from 0,31 to 2,11. • MIN TEMPERATURE: with HNBR -25 °C, with FKM – 10 °C, with FVMQ – 60 °C” • MAX TEMPERATURE: with HNBR è di + 120 °C, with FK + 200 °C, with FVMQ 170 °C” • TIGHTNESS CLASS : Class IV for metal seat. Class VI for soft seat.

PRODUCT DESCRIPTION

Regulators of UBA-HHP series are high pressure, spring-piston loaded, direct operated regulators. They work as pressure reducing regulators. Therefore, their main function is the regulation of the outlet pressure (P2) of the process they are installed on.
The compact and rugged design they feature allows the employment of UBS-HHP under a wide variety of high pressure process conditions. The regulated process fluids can be both industrial liquids and gases. There are basically two different standard constructions, namely IS3 (Stainless Steel) construction (standard) and MS3 (Monel) contruction (special).
Rating of connections is available up to ANSI 2500.
The possibility of supplying different materials for the elastomeric parts makes them good candidates for a wide group of process fluids chemically different from each others. They are easy to install and to maintain.

LIST OF FEATURES

• FUNCTION: Reduction, direct acting

• CONNECTIONS DIAMETERS: from¼” up to 2”

• CONNECTIONS TYPE Threated ends NPT-F, Flanged ANSI (upon request).

• BODY MATERIALS : Stainless Steel (316SS), Monel.

• MAX RATING: ANSI 2500.

• MAX UPSTREAM PRESSURE: 300 bar.g.

• BODY MATERIALS: Stainless Steel (316SS), Monel.

• REGULATED INTERVALS: 1 – 135 bar.g. For higher or lower pressures contact our technical department.

• DIAMETER: from “1/4” up to 2” (DN ¼” only with threated end).

• SEAT: single.

• Cv: from 0,31 to 2,11.

• MIN TEMPERATURE: with HNBR -25 °C, with FKM – 10 °C, with FVMQ – 60 °C”

• MAX TEMPERATURE: with HNBR è di + 120 °C, with FK + 200 °C, with FVMQ 170 °C”

• TIGHTNESS CLASS : Class IV for metal seat. Class VI for soft seat.

Additional information

BPMP

UBS HHP

UBA/UBAS 80

UBA HHP

Additional information

Related products

BPMP

UBS HHP

UBA/UBAS 80